Position Sensor: CP-1Hx Series – Small Contactless Dual Output Position Sensor

Very Small Hall-IC Angle Position Sensor

CP-1Hx is a small contactless dual output position sensor with the following features:

・Compact Size Φ21mm, Thinness 4.4mm
・Effective Electrical Travel: 90°, 180°, 360° (359.9°)
・Single Output (3-wire), Dual Output (6-wire)
・Output: Voltage Ratio, PWM
・Shaft Shape: Double Side Flat Shaft, D-Cut, Touchless
・IP67

Main Page of CP-1Hx Series> Click Here

CP-1Hx series Features

Smaller Than a Quarter & Thin As 0.17inches

With the diameter of 0.82in (21mm) and 0.17in (4.4mm) thinness, CP-1Hx fits any limited tight spaces. Offering high level protection against EMS, EMI, and ESD.

Single/ Dual Output

Although this is a small potentiometer, it is feasible for offering dual output. The available analog output signal is voltage ratio output (Standard) and PWM (Pulse Width Modulation).

Wider Angle Measurement

Even though it is an unprecedented small potentiometer, wide angle measurement of up to 360° (Dead angle:0.1°) is possible.
(Mechanical angle is 360° endless.)

CP-1Hx Series Specifications

Effective Electrical Angle	±45°, ±90°, ±180° (Dead Angle: 0.1°)
Absolute Linearity	±2%FS (FS=50°)
Input Voltage	DC 5 ±0.5V
Output Variation	Ratio, PWM
Output Range	10%Vin ~ 90% Vin
Category Temp.	-40℃ ~ +85℃
Vibration	200m/S2 5 ~ 500Hz
Shock	500m/S2 11ms
EMS (Immunity)	ISO 11452-2, -3 100V/m
EMI (Emission)	CISPR25
ESD	IEC61000-4-2 ±15kV
IP Level	IP67 (Except Shaft Side)