CP-16U Series
←BACK
TMR-Element Angle Potentiometer
| Our CP-16U Series is designed to be …
Key Features:
Have an evaluation sample request for this product or any questions about it? Please contact us.
|
 |
Features
1. Ultra-low Current Consumption of 0.6mA MAX.Typical contactless Hall-IC position sensor has a current consumption of about 10mA however the current consumption of CP-16U is much lower at 0.6mA.
|
|
2. Load Resistance of 100KΩTypical low current consumption sensor requires to add a load resistance more than a few MΩ. However, since CP-16U is only required to add a load resistance 100kΩ Min, it allows you to design circuit easily compare to use other low current consumption sensor. |
|
3. Linear Curve OutputThe output curve of a MR-element sensor is a Sine curve and therefore the linearity gets worse at wider angle but the output curve of CP-16U is a linear curve as the result its keeps relatively good linearity even at a wider angle.
|
|
4. High Speed Response/ High Output ResolutionThe response time of typical Hall-IC sensor is several kHz and output resolution is 12-bit but on the other hand CP-16U provides the response time 100kHz Min. and virtually infinite output resolution by using the analog circuit.
|
PRODUCT SPECIFICATIONS
Electrical Specifications
| Effective Electrical Travel | 90° |
| Output Sensitivity | 3.5~6.5%Vin/10° |
| Independent Linearity | ±1.5%FS |
| Input Voltage | DC3~5.5V |
| Current Consumption | 0.6mA MAX. |
Mechanical Specifications
| Total Mechanical Travel | 360° Endless |
| Thrust Load Tolerance | 1N |
| Radial Load Tolerance | 5N |
| Torque | 1N |
| Weight | Approx.10g |
Environmental Specifications
| Category Temp. Range | -30 ~ +100℃ |
| Temperature Compensate Range | -40 ~ +100℃ |
| ESD | ±4kV(IEC61000-4-2) |
| EMS | 25V/m, 1MHz ~ 1GhHz (ISO11452-2,-3) |
DIMENSIONS (mm)
 |
OPTIONS
-
-
- Effective Electrical Angle: 120°(Independent Lin.:±2.5%FS)
- Temperature Compensate Range: TC-B(-20~+80℃)
-
DATA SHEET (PDF)/ CAD DATA (DXF)/ SHOP
| Product Number | Angle | Ind.Lin. | Shaft Size | Input Voltage | Feature | Data/ Shop |
| CP-16U | 90° | ±1.5%FS | Φ3mm | DC3 ~ 5.5V | Current Consumption: 0.6mA | PDF DXF SHOP |
RELEVANT INFORMATION
・Article
Technical Information “CP-16U Series- Contactless Angle Potentiometer ” Post Date 03/04/2019
HANDLING INSTRUCTION
-
- This product can not be used for measurements of the resistance value.
- This product may be influenced by the external magnetic field.
- Use this product in an environment protected from ESD.
APPLICATION EXAMPLES
 |
Winding Machine: Tension & Speed control |
 |
Valve Positioner: Valve position |
 |
FlowMeter: Flow regulating valve |
Application Example by Use > Click Here
|
Looking to shop online or looking for product customization? |
EXPLORE SIMILAR PRODUCTS (Single-Turn Potentiometer)
 CP-2UN Series: Contactless type |
 CP-2FJ Series: Contact type |
 QP-2H Series: Contactless type |
>Find out more Single-Turn Potentiometer
Explore Other Product Categories
|
Got A Challenge For Us? We understand that each project has a unique requirement. |